Titanium Gr.2 DIN934 Long Nuts

Titanium Gr.2 DIN934 Long Nuts

Item: Titanium long nuts
Materials: Titanium grade 2
Standard: DIN934
Size: M8×15
MOQ: 100pcs
Surface: titanium Machined Bright or forged
Laser Marking is available, marking content is determined by the customer
MTC: EN10204 3.1

  • Fast Delievery
  • Quality Assurance
  • 24/7 Customer Service
Product Introduction
1
Products Description

 

Titanium Gr. 2 DIN 934 long nuts are specialized fasteners made from Grade 2 titanium, a commercially pure titanium alloy known for its excellent corrosion resistance and high strength-to-weight ratio. These nuts conform to the DIN 934 standard, which specifies the dimensions and tolerances for metric hex nuts. The "long" designation typically means they have a longer body than standard nuts, providing greater thread engagement and improved stability in applications where a longer reach is required. Due to their titanium construction, these nuts are lightweight and resistant to various corrosive environments, making them suitable for aerospace, marine, and chemical processing industries, where durability and weight savings are essential.

2
Products pictures

 

Titanium Gr2 DIN934 long nuts

Titanium Gr.2 Long nuts 

DIN934 long nuts M8 titanium

Titanium Gr.2 DIn934 long nuts M8*15mm

3
Products Parameter
Items Titanium Gr.2 DIN934 long nuts
Materials Titanium Gr.2 or Gr.5 Gr.7 Gr.9
standard DIN934 and other DIN, ISO standards
Size Min M2 
MOQ 100pcs
MTC EN10204 3.1
Laser marking we can make Laser markings on nuts if you need
4
Products Ingredients and properties

 

Gr2 is pure titanium. GR5 is Ti6AL4V, except the chemical composition is different, also GR2 are mostly used for industry etc, GR5 are mostly used for racing car/motorcycle/bicycle, etc, it has high Tensile Strength and Yield Strength.

The difference is as follows, please check it, thanks.

 

Requirement

MIN(Gr2)

Tensile Strength

Yield Strength

Elongation

Reduce of area

[Mpa]

[Mpa]

[%]

[%]

345 MIN

275MIN

20 MIN

30 MIN

 

 

Requirement

MIN(Gr5)

Tensile Strength

Yield Strength

Elongation

Reduce of area

[Mpa]

[Mpa]

[%]

[%]

895 MIN

825 MIN

10 MIN

25 MIN

5
Choice of processing method

In the manufacturing process of nuts, we have two different methods to choose from, namely mechanical machining and forged processing. These two methods have some differences in terms of cost and appearance, so we need to select the appropriate manufacturing method based on specific requirements.

First, let's take a look at the mechanical machining method. Mechanical machining is a complex manufacturing process, which is why the price of machined nuts is relatively high. However, due to its complexity, mechanical machining can provide a very smooth and precise appearance. After being mechanically machined, the sides of the nuts exhibit a high level of surface finish, making them appear more exquisite and suitable for applications with high aesthetic requirements.

In contrast, there is the forged processing method, which has relatively simpler procedures and therefore comes at a lower cost. While forged nuts may not have the same level of smoothness in appearance as mechanically machined ones, there is no difference in performance compared to nuts produced through mechanical machining. Therefore, if your aesthetic requirements for nuts are not particularly high, and you are more concerned about cost-effectiveness, stamped nuts may be a more economical choice.

Comparison of machine-made long nuts and forged long nuts:

Comparison of machine-made long nuts and forged long nuts

6
Products packaged method

Package method of titanium fasteners

1
other questions:

Q: Do you inspect the finishing products?

A: Yes, Our Quality Control Department will inspect each screw one by one before delivery. we make sure all sizes are according to standard or your drawing or your supplied samples, 100% final check with go gauge and no go gauge. we supply MTC EN10204 3.1. Paying attention to product quality has always been the central principle we adhere to.

 

Q: What's your delivery time?

A: In stock, 5 days; production generally is about 30 days; lead time of larger qty according to your quantity.

 

Q4.Can we mark our logo on products?

A4. Of course, we can laser mark your own logo on products.

 

Q: What is the transportation way?

-By express( FedEx, DHL, TNT, EMS, etc.) airline, or sea or by train according to your needs.

 

Q: What are your terms of payment?

A: Mostly, it is T/T30% down payment in advance and T/T 70% (the balance) before shipment or Negotiation.

 

 

 

You Might Also Like

(0/10)

clearall