Titanium ISO14583 6-Lobe Pan Head Screws
Name: titanium pan head screws
Materials: Titanium grade 2 or Gr.5 gr.7 gr.9 etc
Standard: ISO14583
Min: M2
MOQ: 100pcs
Surface: titanium Machined Bright or Customized colors( anodizing or PVD colors)
Laser Marking is available, marking content is determined by the customer
MTC: EN10204 3.1
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Products Description
Titanium ISO14583 6-Lobe pan head screws are screws with pan heads made of titanium. ISO 14583 is an International Organization for Standardization (ISO) standard for fasteners with 6-Lobe (hexalobular) pan head screws. The standard specifies the dimensions, materials, and other relevant properties of these screws.
Product drawing and specifications
Pan head screws have a flat, slightly rounded head with a low profile and a diameter larger than the shaft of the screw. They are designed to be used with objects where a low-profile head is desired, allowing the screw to sit flush or slightly below the surface of the material.
The 6-Lobe drive, also known as Torx or star drive, has a six-pointed star-shaped pattern on the screw head that offers better torque transmission and reduces the risk of cam-out (slippage) compared to traditional flat or Phillips head screws. This makes them popular for applications where high torque is needed or when a secure fit is crucial.
Titanium screws are known for their excellent strength-to-weight ratio, corrosion resistance, and biocompatibility, which makes Titanium ISO14583 6-Lobe pan head screws commonly used in various industries, including aerospace, medical, and sports equipment.
Products parameters
| Name | Titanium ISO14583 6-Lobe pan head screws | |||
| Materials | Pure titanium and titanium alloy Ti6Al4V | |||
| Head | pan head | |||
| Standard | ISO14583 | |||
| Size | Min M2 | |||
| MOQ | 100pcs | |||
| MTC | EN10204 3.1 | |||
| Laser marking | we can make Laser mark, the content as per your requirements. | |||
Product Picture
Our factory
workshop
workshop
workshop
workshop
FAQ:
Q: Do you inspect the finishing products?
A: Yes, Our Quality Control Department will inspect each screw one by one before delivery. we make sure all sizes are according to standard or your drawing or your supplied samples, 100% final check with go gauge and no go gauge. we supply MTC EN10204 3.1. Paying attention to product quality has always been the central principle we adhere to.
Q: What's your delivery time?
A: In stock, 5 days; production generally is about 30 days; lead time of larger qty according to your quantity.
Q: Do you have the MOQ?
A: No MOQ requirement If we have stock, stock goods will send to you soon. But usually, we have the MOQ is 100pieces.
Q4.Can we mark our logo on products?
A4. Of course, we can laser mark your own logo on products.
Q: What are the shipping costs?
A: It depends on the weight of the final gross weight and destination port. we can ship by air, sea, train, Fedex DHL UPS, etc. We can offer you the most favorable as well as safe and efficient freight services.
Q: What are your terms of payment?
A: Mostly, it is T/T30% down payment in advance and T/T 70% (the balance) before shipment or Negotiation.
