Titanium Gr1 Round Bar
Titanium Gr1 Round Bar
Name: Titanium Gr1 bar
Grade: GR1
Material: Pure titanium
Standard: ASTM B348 ASTM F67 ISO5832
Size: Diameter:1.0-350mm L: as per the Customer’s requirement
Shape: Round
MTC: EN10204 3.1
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Products Description
Titanium Gr1 Round Bar is our one titanium bar shape. Our company can produce Titanium Gr1 Bar in different shapes and sizes such as round, rectangular, and hexagonal. They are made from high-quality titanium ingots. The bar products can meet various standards, including ASTM B348, ASME SB348, ASTM F67, ASTM F136, AMS4928, etc. The grades can be commercially pure titanium, grade 1, grade 2, grade 4, and grade 5. grade 9, grade 12, grade 23, etc.
We usually have some of the most common grade bars in stock, such as Grade 1, Grade 2, and Grade 5 bars. If the bars you need are in stock, we can ship them to you the same day. If you need a Titanium Gr1 Round Bar that we do not have in stock, we will usually produce them for you within 10-30 days, depending on the exact quantity of your order.
Products parameters
|
Product Name |
Titanium Gr1 Round Bar |
|
Materials we can make are |
GR1 |
|
Marking |
Customer Requested |
|
Standard |
ASTM B348.ASTM F67.ASME SB348 |
|
Size |
Dia.1.0mm-350mm×L （Customer Requested） |
|
Shape |
Round, flat, square, hexagonal |
|
Packaging |
Standard wooden box packaging |
|
Application |
Industrial, medical, chemical, aerospace, heating Exchanging, Condenser, petroleum, Sports, Bike, etc. |
Products Mechanical Properties and Chemical Component of titanium bar we supply:
|
Grade |
Tensile Strength |
Yield Strength |
Elongation |
Area of Reduction |
||
|
Ksi |
Mpa |
Ksi |
Mpa |
% | ||
|
GR1 |
35 |
240 |
25 |
170 |
24 |
30 |
|
GR2 |
50 |
345 |
40 |
275 |
20 |
30 |
Chemical Component:
|
Grade |
Fe (max) |
C (max) |
N (max) |
O (max) |
H (max)
|
Residuals Element Each (max) |
ResidualsElement Total (max) |
|||
|
Gr1 |
0.2 |
0.08 |
0.03 |
0.18 |
0.015 |
0.1 |
0.4 |
|||
|
Gr2 |
0.3 |
0.08 |
0.03 |
0.25 |
0.015 |
0.1 |
0.4 |
|||
|
|
||||||||||
Products Shape grades and specifications we supply:
|
Shape |
Grade |
Specification(mm） |
Condition |
Standard |
Tolerance |
|
Titanium round bar square bar flat bar hexagonal bar |
Gr1 |
Dia 1.0-350x≤6000 6*6*L To 30*30*L 6*12.7*L To 30*100*L ≤H17*L |
RMY |
ASTM B348 ASTM F67 ASTM F136 AMS 4928 ISO 5832 Etc
|
h6-h13 H10-H13
|
|
Gr2 |
|||||
|
Gr3 |
|||||
|
Gr4 |
|||||
|
Gr5 |
|||||
|
Gr6 |
|||||
|
Gr7 |
|||||
|
Gr9 |
|||||
|
Gr11 |
|||||
|
Gr12 |
|||||
|
Gr23 |
Products Pictures of Titanium Round Bar and rod:
Products Development and Application:
Titanium is an important structural metal developed in the 1950s, titanium round bar with high strength, good corrosion resistance, and high heat resistance, in the 1950s-60s, mainly to develop high-temperature titanium alloys for aircraft engines and structural titanium alloys for airframes.
In the 1970s, a number of corrosion-resistant pure titanium and titanium alloys were developed, and since the 1980s, corrosion-resistant titanium alloys and high-strength titanium alloys have been further developed. Titanium Gr1 Round Bars and rods and titanium alloy bars and rods are mainly used to make aircraft engine pressurized parts, followed by structural parts for rockets, missiles, and high-speed aircraft.
Our strength
1) Big inventory for fast shipment
2) 100% ultrasonic flaw detection, commissioned a third party to carry out physical, mechanical properties, and microstructure testing), 100% ultrasonic flaw detection of raw materials and finished products of titanium ingots, and issued a flaw detection report.
3) Commissioned a third-party authority to carry out physical properties, mechanical properties, and microstructure testing, and issued a test report.
4) Aerospace-level Titanium Raw Material
5) With Chamfer on ends of Bars/Rods/Billets
Products package::
