Comparing Titanium Stamped Washers and Machined Washers: Characteristics, Applications, and Special Uses

Washers are the parts between the connected parts and the nut. It is generally a flat metal ring that protects the surface of the connected part from abrasion by the nut. It can be divided into: washers are divided into flat washers, large washers, oversized washers -, small washers, flat washers, flat washers - chamfered type, high-strength washers, spherical washers, taper washers, square beveled washers, spring washers, spring washers, light spring washers, heavy spring washers, internal teeth lock washers, internal serrated lock washers, external teeth lock washers, external serrated lock washers, single lug stop washers, double lug stop washers, external tongue stop washers The processing aspect of the washers is divided into. The processing aspect of washers is divided into:

1. Cutting and machining is one of the most common methods used in the production of washers. With laser cutting, plasma cutting, band saw cutting and other equipment, sheet metal or other materials can be cut on a flat surface to produce the desired gasket.

Stamping

Stamping is a processing method that deforms the material through continuous stretching, extruding, bending, etc., to make the desired shape through pressure. For washers made of hard materials, such as stainless steel and iron, they can be made by stamping. Stamping processing can be used for mass production using molds and is relatively cost-effective.

Third, bending processing

Bending refers to the sheet metal or other materials through the bending of the way to form the desired shape. Bending is suitable for the production of a more peculiar shape or a more complex curve of the gasket, such as gear washers and machine tool parts of the gasket. Commonly used bending equipment are cutting machines, bending machines, and so on.

Gasket processing needs to pay attention to the following problems:

1, select the appropriate material, according to the use of the environment and requirements to choose the hardness of the material, toughness, etc.;

2, according to the requirements to choose the appropriate processing method to achieve the best production results;

3, the production of gaskets needs to pay attention to the precision and size to ensure the quality and sealing of the gasket;

4, the thickness and diameter of the gasket are produced according to customer requirements to provide

In short, the gasket should be selected according to its use of the environment of the appropriate material. Our company Baoji Pelifly titanium industry mainly produces titanium washers, it is high-strength, high-performance, and corrosion-resistant, so that the best material for the washers. Apply to any place and place, choose the right material and the right processing method, not only can improve the quality of the washers, but also improve the production efficiency and reduce costs.